 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 - 3.3V Output / 10A VRPC-10B Series * * * * * * * * * Nonisolated Industry standard pinout Fixed frequency High efficiency means less power dissipation High power density Optimized for cost Remote on/off Undervoltage lockout Over current and short circuit protection POWER PRODUCTS BP06VRPC-10B RoHS Compliant Description The Bel VRPC-10B series modules are non-isolated DC/DC power converters that operate from a nominal 5V source. These converters are available in a range of output voltages from 1.5V to 3.3V. They are packaged in an industry standard singlein-line footprint with 10A maximum output. Standard features include remote on/off, over current and short circuit protection and output voltage adjust. Remote sense is an optional feature. These products may be used almost anywhere low voltage silicon is employed and a 5V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications * * * Telecommunications Networking Computers and peripherals Options * Remote sense Part Number Selection Output Voltage 3.3V 2.5V 1.5V Input Voltage 5V 5V 5V Max. Output Current 10A 10A 10A Max. Output Power 33W 25W 15W Typical Efficiency 94% 92% 87% Part Number VRPC-10B330 VRPC-10B250 VRPC-10B150 Part Number Remote Sense Option VRPC-10B33S VRPC-10B25S VRPC-10B15S (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 1 POWER PRODUCTS BP06VRPC-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 - 3.3V Output / 10A Absolute Maximum Ratings Parameter Continuous Input Voltage Output Enable Terminal Voltage Ambient Temperature Storage Temperature Symbol Vin Vouten Tamb Tstor Min -0.3 -0.3 0 -55 Typical Max 6 6 70 105 Unit V V C C Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Operating Input Voltage Input Current No Load Input Current Remote Off Input Current Input Reflected Ripple Current1 Input Reflected Ripple Current (P-P)1 I2t Inrush Current Transient Turn On Voltage Threshold Turn Off Voltage Threshold Symbol Vin Iin 35 3 10 40 0.05 4.25 3.85 Min 4.5 Typical Max 5.5 9.5 50 10 20 80 0.07 Units V A mA mA mArms mApk A2s V V Note: Input capacitance 1000F/16V, ESR = 0.078 max at 100kHz @ 25 C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 - 3.3V Output / 10A POWER PRODUCTS BP06VRPC-10B Output Specifications Parameter Output Voltage Set Point1 3.3V 2.5V 1.5V Load Regulation 3.3V 2.5V 1.5V Line Regulation Regulation Over Temperature 0 - 70 C All 8 6 5 5 16 12 10 10 mV mV 3.3V 2.5V 1.5V 20 17 15 40 30 25 mV 3.3V 2.5V 1.5V Output Ripple and Noise2 Output Ripple and Noise2 Output Current Range Output DC Current Limit Short Circuit Surge 3.3V 2.5V 1.5V Turn on Time Overshoot at Turn On Output Capacitance All All All Cout 0 Ton All All All All Iout Ioutlim Ioutsurge 0.25 0.2 0.1 11 0 0.3 0.25 0.15 20 3 4700 ms % F 0 13 33 28 25 50 15 66 52 45 100 25 10 25 mVp-p mVrms A A A2s Module Symbol Vout 3.234 2.450 1.470 3.3 2.5 1.5 3.366 2.550 1.530 mV Min Typical Max Units V Total Output Voltage Regulation Note: All specifications are typical at nominal input, full load at 25 C unless otherwise stated. 1. Vin = 5V, Iout = full load, Ta = 25 C. 2. 0 - 20MHz BW, 0.1F ceramic cap on output. (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 3 POWER PRODUCTS BP06VRPC-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 - 3.3V Output / 10A Output Specifications Parameter Transient Response3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load Settling Time Transient Response3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load Settling Time Transient Response3 V 50% to 100% of Max Load Settling Time V 100% to 50% of Max Load Settling Time 1.5V 80 Ts 40 120 80 mV s Ts 70 40 120 80 mV s 2.5V 90 Ts 40 130 80 mV s Ts 90 40 130 80 mV s 3.3V 100 Ts 40 150 80 mV s Ts 90 40 150 80 mV s Module Symbol Min Typical Max Units Note: All specifications are typical at nominal input, full load at 25 C unless otherwise stated. 3. di/dt = 0.5A/uS, Vin = 5VDC, Ta = 25 C, and with a 470F aluminum cap on output. (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 - 3.3V Output / 10A POWER PRODUCTS BP06VRPC-10B General Specifications Parameter Efficiency1 3.3V 2.5V 1.5V Switching Frequency Output Voltage Trim Range 3.3V 2.5V 1.5V Remote Sense Compensation Weight All All 9.2 70 70 90 110 110 120 10 % g All Fsw Module Symbol 92 90 85 230 94 92 87 300 340 kHz % Min Typical Max Units % 1. Vin=5V, full load and Ta=25 C. Control Specifications Parameter Remote On/Off Signal Low (Unit On) Signal High (Unit Off) Module All All All Symbol Vouten -0.3 2.8 0.3 5.5 Min Typical Max Units V V V (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 5 POWER PRODUCTS BP06VRPC-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 - 3.3V Output / 10A Efficiency Data Module 3.3V 98.0% EFFICIENCY 96.0% 94.0% 92.0% 90.0% 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 OUTPUT CURRENT 4.5V 5V 5.5V Module 2.5V 1.5V 94.0% 96.0% EFFICIENCY 94.0% 92.0% 92.0% 90.0% 90.0% 88.0% 88.0% 86.0% 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 OUTPUT CURRENT (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 6 POWER PRODUCTS BP06VRPC-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 - 3.3V Output / 10A Ripple and Noise Ripple and noise at full load and 5Vdc input and Ta=25 C Transient Response Transient response: di/dt = 0.5A/S, external load capacitance Co = 470F (electrolytic) 50% to 100% load transients at 5V input and Ta=25 C 100% to 50% load transients at 5V input and Ta=25 C (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 7 POWER PRODUCTS BP06VRPC-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 - 3.3V Output / 10A Thermal Considerations Derating Curve 10 300LFM 8 Output Current (A) 6 4 Natural Convection 2 0 0C 10C 20C 30C 40C 50C 60C 70C Ambient Temperature, Ta (C) Output Current vs. Local Ambient Temperature and Air Velocity (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 8 NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 - 3.3V Output / 10A POWER PRODUCTS BP06VRPC-10B Mechanical 0.55 [13.97] 0.36 [9.14] max 0.063 [1.60] 0.20 [5.08] 2.50 [63.50] 0.025 [0.64] 0.10 [2.54] 0.28 [7.11] 1.90 [48.26] 0.13 [3.30] 0.183 [4.65] Dimensions are in inches [millimeters]. Standard dimension tolerance is 0.005 [0.13] unless otherwise noted. Pin 1 2 3* 4 5 6 7 8 9 10 11 Function +Vo +Vo No Pin +Vo Ground Ground +Vin +Vin No Pin Trim Remote On/Off 12345 6 7 8 910 11 *Pin 3 used for remote sense option. RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. (c)2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 9 |
Price & Availability of VRPC-10B15S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |